Study of aggregate in concrete and effect of mixing rubber to the aggregate

Authors

  • Adil Bashir Bhat
  • Ranadip Mandal

Keywords:

granular, inorganic, inevitable, aggregates

Abstract

Aggregates are defined as inert, granular, and inorganic materials that normally consist of stone or stone-like solids. Aggregates can be used alone (in road bases and various types of fill) or can be used with cementing materials (such as Portland cement or asphalt ce- ment) to form composite materials or concrete. The most popular use of aggregates is to form Portland cement concrete. Approximately three-fourths of the volume of Portland ce- ment concrete is occupied by aggregate. It is inevitable that a constituent occupying such a large percentage of the mass should have an important effect on the properties of both the fresh and hardened products. As another important application, aggregates are used in as- phalt cement concrete in which they occupy 90% or more of the total volume.

References

N. J. Azmi, B. S. Mohammed, H. M. A. Al-Mattarneh, Engineering Properties of Con- crete Containing Recycled Tyre Rubber, ICCBT(2008).

Suthar Sunil B, Dr. (Smt.) B. K. Shah, Study on Strength Development of High

Strength Concrete Containing Alccofine and Fly-Ash, IJR(2003).

H. Katkhuda, B. Hanayneh and N. Shatarat, Influence of Silica Fume on High

Strength Lightweight Concrete,WASET(2009).

El-Gammal, A.; A. K. Abdel-Gawad; Y. El-Sherbini, and A. Shalaby, Compressive

Strength of Concrete Utilizing Waste Tyre Rubber, JETEAS(2010).

K S Malladi and S V Barai, Experimental studies on rubber fiber based concrete.

Downloads

Published

30-06-2016

How to Cite

Adil Bashir Bhat, & Ranadip Mandal. (2016). Study of aggregate in concrete and effect of mixing rubber to the aggregate. International Journal for Research Publication and Seminar, 7(3). Retrieved from https://jrps.shodhsagar.com/index.php/j/article/view/809

Issue

Section

Original Research Article