TO STUDY THE MECHANICAL PARAMETER OF SUB MERGED ARC WELDING PROCESS

Authors

  • Manoj Kumar
  • Kuldeep Boora
  • Lalit
  • Somvir Arya

Keywords:

electrode, suppressing, mechanized

Abstract

SAW is one of the non pressure electric arc welding process. It requires a continuously fed consumable solid electrode. The weld and the arc zone are protected from atmospheric contamination by being “Submerged” under a blanket of granular fusible flux. When molten, the flux becomes conductive and provides a current path between the electrode and the work. The thick layer of flux completely covers the molten metal thus preventing spatter and sparks as well as suppressing the intense ultraviolet radiation and fumes. SAW is normally operated in the automatic or mechanized mode, however, semi-automatic SAW guns with pressurized or gravity flux feed delivery are available.

References

NA

Downloads

Published

31-12-2015

How to Cite

Manoj Kumar, Kuldeep Boora, Lalit, & Somvir Arya. (2015). TO STUDY THE MECHANICAL PARAMETER OF SUB MERGED ARC WELDING PROCESS. International Journal for Research Publication and Seminar, 6(6). Retrieved from https://jrps.shodhsagar.com/index.php/j/article/view/671

Issue

Vol. 6 No. 6 (2015): Volume 6 | Issue 6 | Oct-Dec 2015

Section

Original Research Article

License

Copyright (c) 2015 International Journal for Research Publication and Seminar

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Re-users must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. This license allows for redistribution, commercial and non-commercial, as long as the original work is properly credited.