Effect of Perforation Shape on The Efficiency of Heat Sink Fin- A Review

Authors

  • Ashish Ranjan P.G. Student, Department of Mechanical Engineering, Radharaman Institute of Research and Technology, Bhopal, M.P., India
  • Vishal Gupta Associate Professor, Department of Mechanical Engineering, , Radharaman Group of Institution, Bhopal, M.P., India
  • Samarjeet Bagri Assistant Professor, Department of Mechanical engineering, Radharaman Group of Institutions, Bhopal, M.P., India

Keywords:

performance, Electrical, mechanical, cooling device

Abstract

In today’s scenario world is facing extreme problems with electrical devices. As the increasing demand of electrical appliances has resulted in low cost manufacturing. Low cost manufacturing has resulted in various problems to the man kind. Various researches are prevailing in the field of electrical engineering appliances to provide the world with new and modern technology. Electrical and mechanical goes in series with each other. In this study main focus is devoted on Heat sink fin which acts as a cooling device for various applications. Most of the researches are going on to improve this device for the performance enhancement of the devices in which high amount of cooling is required. In this paper a brief review of the studies conducted to increase the efficiency of heat sink fin is presented.

References

Kavita H. Dhanawade, Vivek K. Sunnapwar and Hanamant S. Dhanawade “Thermal Analysis of Square and Circular Perforated Fin Arrays by Forced Convection” International Journal of Current Engineering and Technology E-ISSN 2277 – 4106, P-ISSN 2347 – 5161

M. Khoshvaght-Aliabadi, F. Hormozi , A. Zamzamian “Experimental analysis of thermal–hydraulic performance of copper–water nanofluid flow in different plate-fin channels” Experimental Thermal and Fluid Science 52 (2014) 248–258.

Downloads

Published

30-06-2017

How to Cite

Ashish Ranjan, Vishal Gupta, & Samarjeet Bagri. (2017). Effect of Perforation Shape on The Efficiency of Heat Sink Fin- A Review. International Journal for Research Publication and Seminar, 8(6). Retrieved from https://jrps.shodhsagar.com/index.php/j/article/view/1134

Issue

Vol. 8 No. 6 (2017): Apr - June 2017

Section

Original Research Article

License

Copyright (c) 2017 International Journal for Research Publication and Seminar

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Re-users must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. This license allows for redistribution, commercial and non-commercial, as long as the original work is properly credited.