Study of Different types of Coatings used for cutting tools for enhancement of performance

Authors

  • Paarth Parashar Research Scholar
  • Jai Bhagwan

Keywords:

cutting, tools, coatings, hard coating

Abstract

Metal cutting is the removal of metal from work piece in the form of chips in order to obtain a finished product with desired shape, size and surface finish. Virtually all producing units for example automobiles, railways, aircraft manufacture, shipbuilding, home appliance , consumer electronics and construction industries etc required large shops with many thousands of machining .The machining cost amounts to more than 15% of the value of the all manufactured products in all industrial countries. Of all the processes used to shape and size the metals in metal cutting process the conditions of operation can be varied to a high extent to improve the quality and the rate of producing parts with a reduced cost.

References

H.A. Jehn, S. Hofmann and W.D. Munz, Thin Solid Films,1987, v. 153, pp. 45-45.

Y. Yeung', R. Wuhre~ and D.J. Attard, L. Hultman, G. Hakansson, U. Wahlstrom, lE. Sundgren, I. Petrov, F. Adibi and J.E. Greene, Thin Solid Films, 1991, v. 205, pp. 153-153.

U. Wahlstrom, L. Hultman, J.E. Sundgren, F. Adibi, I. Petrov and J.E. Greene, Thin Solid Films, 1993, v. 235, pp. 62-62.

O. Knotek, F. Loffler, H.J. Scholl and C. Barimani, Surface Coating Technology, 1994, v.68, pp. 309-309.

Sugishima, H. Kajioka and Y. Makino, Surface Coating Technoogy,1997, v. 97, pp. 590-590.

K. Tonshoff, A. Mohlfeld, T. Leyendecker, H.G. Fub, G. Erkens, R. Wenke, T. Cselle and M. Schwenck, Surface Coating Technoogy,1997, v. 603, pp. 94-95.

R. Wuhrer and W.Y. Yeung, J Material Science, 2002, v. 37, pp.34-77.

Bhansali, A. S., Sinclair, R., Morgan, A.E., “A Thermodynamic Approach for Interpreting Metallization Layer Stability and Thin Film Reactions Involving Four Elements: Application to Integrated Circuit Contact Metallurgy”, Applied Physics, 1980, v. 68, pp.10-43.

Brogren, M., Harding, G. L., Karmhag, R., Ribbing, C. G., Niklasson, G. A., Stenmark, L,Titanium-Aluminum-Nitride Coatings for Satellite Temperature Control. Thin Solid Film, 2000; 370: 268.

Downloads

Published

30-06-2016

How to Cite

Paarth Parashar, & Jai Bhagwan. (2016). Study of Different types of Coatings used for cutting tools for enhancement of performance. International Journal for Research Publication and Seminar, 7(3). Retrieved from https://jrps.shodhsagar.com/index.php/j/article/view/810

Issue

Vol. 7 No. 3 (2016): April - June 2016

Section

Original Research Article

License

Copyright (c) 2016 International Journal for Research Publication and Seminar

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Re-users must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. This license allows for redistribution, commercial and non-commercial, as long as the original work is properly credited.