IMPACT OF PREFABRICATION TECHNOLOGY & EQUIPMENT ON PROFITABILITY

Authors

  • Ms. Ritu Bhalerao Student M.E. Construction management, Dept. of Civil Engineering, DY Patil School of Engineering & Technology, Ambi Pune - 410507, India
  • Dr. Sumant Kulkarni Head of the Department of Civil Engineering DY Patil School of Engineering & Technology, Ambi Pune - 410507, India

Keywords:

Prefabricated elements, sustainable construction, environmental protection, profitability

Abstract

Prefabricated building & structural elements were also assembled from homogeneous pre - fabricated three-dimensional items, which provide strength, predetermined thermal assets of structure, dynamic consistency, & unlink ability of geometric aspects of a pre - fabricated components all through their fabrication, transportation, & setup under unique & challenging conditions. By term as their influence for environment preservation, prefabrication had being largely recognized like a sustainable building technique. A significant part of this approach is the impact of prefabrication just on decrease of development waste & the associated waste management operations, such as waste recycling, reusing, recycling, & disposal. Industry-improvement suggestions or a research of the cost-effectiveness in precast cement building.
This proposal proposes replacing non-structural components by prefabricated elements. The cost study would include the aspect of traditional construction prefabrication.

References

Abhishek K.Taware1’ Prefabrication, Sustainable Technique in Building Construction’ Volume 1, Issue 2, February 2017

Aki Aapaoja “the Challenges Of Standardization Of Products And Processes In Construction” Proceedings IGLC-22, June 2014

EvanjalineLibie “Impact Of Prefabrication On Profitability Over Traditional Construction’’ ISSN: 2455-5797 Vol. (2), No. (3): June 2016

Elzbieta Radziszewska -Zielina, Monika Glen. “Studies of the Prefabricated Housing Construction Market in Poland” Journal Of Civil Engineering Vol. 9, Issue 2, 2014

Gerhard Girmscheid, “Industrialization in Building Construction – Production Technology or Management Concept” Vol. 8, Issue 1, 2012

H. W. Lee “Macroeconomic Labor Productivity and Its Impact on Firm’s Profitability” Journal of the Operational Research Society August 2013

Hamza Khan “Study on the Trends & Usage of Prefabrication and Modularization: Increasing Productivity in the Construction Industry” ISSN 2278-3652 Volume 8, Number 2 (2017)

Hong Xue “Factors Affecting the Capital Cost of Prefabrication—A Case Study of China” Published: 24 August 2017

M. Muhammed Ansar T.Subramani1, “Impact Of Prefabricated Technology & Equipment On The Profitability Using Primavera” ISSN 2278-6856Volume 6, Issue 3, May - June 2017

Mohamed Nor Azhari Azman “The Perspective View Of Malaysian Industrialized Building System (Ibs) Under Ibs Precast Manufacturing” The 4Th International Engineering Conference 2012

N.Dinesh kumar “Comparative Study on Prefabrication Construction with Cast In-Situ Construction of Residential Buildings” ISSN 2348 – 7968 ,29 September 2016

Ong Ying Rui1 “The Productivity Rate of Prefabricated Pre-Finished Volumetric Construction (PPVC)” Construction management Vol 2, November 2016

Omid Reza Baghchesaraei “Behavior of Prefabricated Structures in Developed and Developing Countries” ISSN 1229 – 1234 Vol. 85, 2016

T. Subramani “Impact Of Prefabricated Technology And Equipment On The Profitability Using Primavera” Volume 6, Issue 3, May- June 2017

Tony Cunningham “Factors Affecting The Cost of Building Work – An Overview” School of Surveying and Construction Management 2013-10-09

Tianying Li “Strategies for Implementation of Integrated Prefabrication Technology in Small Scale Isolated Buildings” UIA 2017

Vaishali Turai “A Study of Cost Comparison of Precast Concrete Vs Cast-In-Place Concrete” Volume – 2, Issue – 2, June – 2016

Yuan, HP “Investigating waste reduction potential in the upstream processes of offshore prefabrication construction” September 2014

Downloads

Published

30-09-2022

How to Cite

Ms. Ritu Bhalerao, & Dr. Sumant Kulkarni. (2022). IMPACT OF PREFABRICATION TECHNOLOGY & EQUIPMENT ON PROFITABILITY. International Journal for Research Publication and Seminar, 13(4), 222–234. Retrieved from https://jrps.shodhsagar.com/index.php/j/article/view/304

Issue

Vol. 13 No. 4 (2022): Vol 13 | Issue 4 | Jul - Sep 2022

Section

Original Research Article

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Re-users must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. This license allows for redistribution, commercial and non-commercial, as long as the original work is properly credited.