A Review on Disc Brake Design Analysis Using Various Optimization Techniques
Keywords:
Disk brake, Finite element Method, disc brake, decelerating, developmentAbstract
This paper reviews numerical methods and analysis procedures used in the study of automotive disc brake. It covers Finite element Method approaches in the automotive industry, and in complex contact analysis. The advantages and limitations of each approach will be examined. Disc brakes have evolved over time to be a reliable method of decelerating and stopping a vehicle. There have been different designs of disc brake systems for different applications. This review can help analysts to choose right methods and make decisions on new areas of method development in the field of improving disc brakes. It points out some outstanding issues in modeling and analysis of disc brake squeal.
References
Shadman Tahmid, and Saima Alam” Numerical Analysis of Frictional Heat Generation in Bicycle Disc Brake” AIP Conference Proceedings 1851, 020042 (2017); doi: 10.1063/1.4984671
Mr. Sumeet Satope” Thermal Analysis of Disc Brake” IJIRST –International Journal for Innovative Research in Science & Technology| Volume 3 | Issue 12 | May 2017ISSN (online): 2349-6010
Rakesh Jaiswal, Anupam Raj Jha “ STRUCTURAL AND THERMAL ANALYSIS OF DISC BRAKE USING SOLIDWORKS AND ANSYS” International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 1, Jan-Feb 2016, pp. 67-77, Article ID: IJMET_07_01_008
A. Vennila “Performance Analysis on Disc Brake of Super Bikes” International Journal of Engineering Research & Technology (IJERT) http://www.ijert.org ISSN: 2278-0181 IJERTV5IS100331 Vol. 5 Issue 10, October-2016
Srinivas Talari” Design and Thermal Analysis of Disc Brake for Sports Bikes”International journal and magazine of engineering technology management and research,Volume 3 (2016)
Vijay Kumar B, Pavan Kumar B K2, Manjunatha “Finite Element Analysis of Two Wheeler Disc Brake Rotor” Imperial Journal of Interdisciplinary Research (IJIR) Vol-2, Issue-7, 2016 ISSN: 2454-1362,
Mr.R.Vijay Krishna, Dr.C.Naga Bhaskar” Performance Analysis of Various Disc Brake Profiles” International Journal of Engineering Trends and Technology (IJETT) – Volume 35 Number 5- May 2016
Sanaka.durga srinivas prasad, k.sandeep kumar “design and analysis of drilled rotar of a disc brake” International journal of eminent engineering technologies Volume 3, Issue 2 JULY 2015
Shailendra pratap gautam“ Finite Element Analysis Of Disc Brake using ANSYS WORKBENCH Software” International Journal of Scientific & Engineering Research, Volume 6, Issue 4, April-2015 1954 ISSN 2229-5518
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 International Journal for Research Publication and Seminar
This work is licensed under a Creative Commons Attribution 4.0 International License.
Re-users must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. This license allows for redistribution, commercial and non-commercial, as long as the original work is properly credited.