A REVIEW OF FIN ARRAY FOR HEAT SINKING
Keywords:
Fin Array, Heat Sinking, MatlabAbstract
A review of Fin Array for Heat Sinking has been proposed here. The Fins are offering a trouble free and economical solution. It has provided solution in various situations. This type of situations demands natural convection of heat shifting. Heat sinks are made of fin arrays on the horizontal and vertical surfaces. These are used in a variety of engineering applications. There are several researches in the field of Fin Array for Heat Sinking which is also described in this paper. Main controlling variable normally available for designer is the geometry of the fin arrays. While considering above fact, an experimental and theoretical investigation of natural convection heat shifting from the vertical rectangular fin arrays with & without notch on centre. Hence notches of various geometrical shapes have analyzed for the purpose of optimization and comparison.
References
Sava PORNEALA in 2007 wrote paper on Performance Thermodynamic Criteria of Absorption Heat Transformers
S. M. Peyghambarzadeh1, M. Jamialahmadi (2009) “Experimental & The Theoretical Study Of The Pool Boiling Heat Shifting To Amine Solutions”, Brazilian Journal of Chemical Engineering, Vol. 26, No. 01, pp. 33 - 43, January - March, 2009
R.J. Romero, Sotsil Silva (2010) “First Double Stage Heat Transformer (Dsht) In Latinamerica”,
Shivdas S. Kharche, Hemant S. Farkade (2012) “Heat shifting Analysis by Fin
Array Using Natural Convection”, International Journal of Emerging Technology & highly developed Engineering Volume 2, Issue 4, April 2012
Dr D P Mishra, S R Dixit, (2013) “Experimental Analysis of Heat Transfer And Average Heat Transfer Coefficient Through Fin Array With or With out Notch Using Free Convection
Padam Singh andManoj Kumar (2014) “Free Convection in Heat shifting Flow on a Moving Sheet in Alumina Water Nanofluid”, Hindawi Publishing Corporation Journal of Engineering Volume 2014
Anurag S.Hatwar, V.M.Kriplani (2014) “A Review on Heat shifting improvement With Nanofluid”, International Journal of Advance Research In Science & Engineering, Vol. No.3, Issue No.3, March 2014
N. K. Chavda1, Jay R. Patel2 (2014) “Effect of Nanofluid On Heat shifting Characteristics Of Double Pipe Heat Exchanger”, International Journal of Research in Engineering & Technology, Volume: 03 Issue: 12
Rameshwar B. Hagote, Sachin K. Dahake (2014) “Study of Natural Convection Heat shifting on Horizontal, Inclined & Vertical Heated Plate By V-Fin Array”, International Journal of Scientific & Engineering Research, Volume 5, Issue 6,
S. Kumar (2014) “A Review: Enhancement of Heat Transfer with Nanofluids”, International Journal of Engineering Research & Technology, Vol. 3 Issue 4, April – 2014
Mr. Lalit B. Chintamani, N.C. Ghuge (2015) “A Review Paper on Experimental Heat shifting improvement using Nanofluids”, International Journal of Innovative Research in highly developed Engineering Issue 2, Volume 2
Rajendra P. Patil, Dr. Atul Patil (2015) “Analysis of Steady State Heat Conduction in various Composite Wall”, International Journal of Innovative Research in Science, Engineering & Technology, Vol. 4, Issue 7, July 2015
Zhiwei Ma, Huashan Bao, Anthony Paul Roskilly (2016) “Performance analysis of ultralow grade waste heat upgrade using absorption heat transformer”, 2016 Published by Elsevier Ltd. under a Creative Commons
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 International Journal for Research Publication and Seminar
This work is licensed under a Creative Commons Attribution 4.0 International License.
Re-users must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. This license allows for redistribution, commercial and non-commercial, as long as the original work is properly credited.
