COMPARATIVE STUDY OF SBS AND EVA POLYMER MODIFIED BITUMEN- A REVIEW

Authors

  • Jitendra Bhargava (SATI Vidisha)
  • Dr. Y. P. Joshi (SATI Vidisha)

Keywords:

pavement construction, binder, Short-term ageing, prolonged exposure

Abstract

The deterioration of the bituminous pavements is because of various conditions prevailing in the country like in addition to the heavy climate and also due to extreme climatic condition. The quality of bitumen could be improved by the addition of polymer as well as improving the quality of binder and also enhancing the property of binder used for the construction of pavements. Due to the prolonged exposure to air and environmental conditions of the bitumen, the major or principle factors take place which causes the deterioration of the asphalt pavements that is Bitumen ageing. There are two types of binder ageing long term ageing and short term ageing. Long-term ageing takes place after pavement construction and is generally due to loading and environmental exposure and Short-term ageing takes place when binder is mixed with aggregates in a mixing plant

References

Avido Yuliestyan, Antonio Abad Cuadri, Moisés García-Morales, (2016), “Binder Design for Asphalt Mixes with Reduced Temperature: EVA Modified Bitumen and its Emulsions” Transportation Research Procedia Volume 14, 2016, Pages 3512-3518.

Xing Liu, Shaopeng Wu, Gang Liu and Liping Li, (2015), “Effect of Ultraviolet Aging on Rheology and Chemistry of LDH-Modified Bitumen” Materials 2015, 8, 5238-5249; doi:10.3390/ma8085238, ISSN 1996-1944.

Zhu, J., Birgisson, B., Kringos, N. (2014) “Polymer Modification of Bitumen: Advances and Challenges” Polymer modification of bitumen: Advances and challenges. European Polymer Journal, 54: 18-38.

Suleiman Arafat Yero, and Mohd. Rosli Hainin (2012), “Viscosity Characteristics of Modified Bitumen” ARPN Journal of Science and Technology, ISSN 2225-7217, VOL. 2, NO. 5, June 2012.

Jian-Shiuh Chen, P.E.; Min-Chih Liao; and Ming-Shen Shiah, “Asphalt Modified by Styrene-Butadiene-Styrene Triblock Copolymer: Morphology and Model”,JOURNAL OF MATERIALS IN CIVIL ENGINEERING / MAY/JUNE 2002 , J. Mater. Civ. Eng. 2002.14:224-229.

M. Garcı´a-Moralesa, P. Partala, F.J. Navarroa, F. Martı´nez-Bozaa, C. Gallegosa, N. Gonza´lezb, O. Gonza´lezb, M.E. Mun˜ozb, (2004). “Viscous properties and microstructure of recycled eva modified bitumen” Elsevier Ltd., M. Garc´ıa-Morales et al. / Fuel 83 (2004) 31–38.

Sinan Hınıslıog˘lua,, Emine Ag˘a'rb, (2003), “Use of waste high density polyethylene as bitumen modifier in asphalt concrete mix”, Elsevier B.V. All rights reserved, S. Hınıslıog˘ lu, E. Ag˘ar / Materials Letters 58 (2004) 267–271.

Downloads

Published

30-09-2017

How to Cite

Jitendra Bhargava, & Dr. Y. P. Joshi. (2017). COMPARATIVE STUDY OF SBS AND EVA POLYMER MODIFIED BITUMEN- A REVIEW. International Journal for Research Publication and Seminar, 8(7), 56–65. Retrieved from https://jrps.shodhsagar.com/index.php/j/article/view/1160

Issue

Vol. 8 No. 7 (2017): July - Sep 2017

Section

Original Research Article

License

Copyright (c) 2017 International Journal for Research Publication and Seminar

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Re-users must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. This license allows for redistribution, commercial and non-commercial, as long as the original work is properly credited.